Aluminum Mullion Machining Center
Aluminium Window Door End Milling Machine
Mainly used for cutting, drilling, milling and tenon making of thermal-break aluminum swing windows, sliding windows and some industrial aluminum profiles.
CNC End Milling Machine for Aluminium Doors and Windows
Technical Parameter:
- Maximum section width of profile applied to: 125mm
- Maximum section height of profile applied to: 145mm(for cutting & end milling); 100mm(for hole drilling & milling)
- Processing length range: 400~6000mm
- Raw material length range: 3000~6500mm
- Length processing accuracy: ±0.1mm/1000mm
- Cutting angle accuracy: ±6'
- Hole shape and position accuracy: ±0.1mm
- Surface processing roughness: Ra12.5
Structural Elements Processed:
- 90 degree cutting of both ends of profile
- Glue injection holes
- Mullion connector pin hole
- Water drainage hole
- Mullion connection hole/positioning laser marking
- End milling
Other Machine Parameter:
- Power supply: 380V, 3Phase, 50Hz
- Drilling/milling spindle power: 3.0kW
- Drilling/milling spindle rotating speed: 9000rpm
- End milling spindle power: 3.0kW
- End milling spindle rotating speed: 2860rpm
- Cutting spindle power: 2.2kW
- Cutting spindle rotating speed: 2860rpm
- Working air pressure:0.5~0.8MPa
- Total input power: 49kW
- Total weight: 12.5tons
Main Configuration of Parts:
- Motion control system: Siemens (V90 servo, PLC S7-1500, Industrial computer)
- Air circuit components: AirTAC
- Milling and cutting spindle: Rundawords
- Highly flexible wires and cables: Echu
- Low voltage electrical components: Schneider/Omron/Honeywell
- Frequency converter: Delta
- Linear guide: HIWIN/AirTAC
- Gears and racks: YYC
- Lubrication system: BAOTN
- Drag chain system: HUASITECH